Input Lag on Monitors: What It Is and How to Cut It
Table of contents
Input lag on monitors is the delay between doing something, like clicking the mouse, and seeing the result on screen. The monitor is only one step in that chain. Your mouse, CPU, graphics card and the game itself all add time before the monitor ever gets the frame. Most modern gaming monitors add very little lag of their own, so the biggest gains usually come from settings: game mode, native resolution, a high refresh rate, adaptive sync with a frame cap instead of V-Sync, and NVIDIA Reflex or AMD Anti-Lag.
What input lag is: the chain from click to photon
Input lag is a chain of small delays that add up. When you click, the mouse has to report it, the game has to process it, the CPU has to prepare a frame, the GPU has to render it, and the monitor has to draw it and light the pixels. Only that last part belongs to the monitor.
Here is the chain in order:
- Peripheral. The mouse or keyboard detects the press and sends it to the PC on its next report.
- Game and CPU. The game reads the input on its next update and builds the next frame’s instructions.
- Render queue and GPU. The frame may wait in a queue, then the GPU draws it.
- Display. The monitor receives the frame, may process it, and scans it onto the panel line by line.
- Pixel response. The pixels change from the old shade to the new one.
NVIDIA calls the whole chain “system latency,” and it splits the part inside the computer off as “PC latency.” The term display input lag, or monitor input lag, usually means step 4: the time from the signal reaching the monitor to the image starting to appear. That split matters because it tells you where to look. If your PC queues two or three frames before the GPU gets to them, that wait can easily be larger than anything a good gaming monitor adds.
Input lag vs response time
Input lag and response time measure two different moments. Input lag is how long until the new frame starts showing. Response time is how long each pixel takes to finish changing once it gets the new value. Response time is usually quoted as gray-to-gray (GtG), the time to move from one shade of gray to another.

The two show up differently when you play. High input lag feels like the game is a beat behind your hand, even when the picture looks sharp. Slow response time looks like blur or a trail behind moving objects, which is what monitor ghosting is. A monitor can have one problem without the other.
So a 5ms GtG rating does not mean 5ms of lag. Our guide to whether 5ms response time is good covers what that spec means for gaming. The overdrive setting in your monitor’s menu speeds up pixel transitions, which helps blur, but it does not change when the frame arrives. Our guide to what overdrive does on a monitor explains how to pick the right level without overshoot.

What good input lag numbers look like
Monitor makers rarely list input lag, so the best numbers come from independent reviewers who measure it. RTINGS is a widely used source, and its method is worth knowing before you compare figures.
RTINGS sends a flashing white square from a PC over HDMI or DisplayPort and times how long it takes to appear on the monitor. Its headline result is taken at the monitor’s native resolution and maximum refresh rate, including any overclock setting, which is usually the lowest lag the monitor can reach. It also measures at 60Hz and with backlight strobing on, where the monitor supports it.
There is a floor built into this kind of test. A monitor draws each frame from top to bottom, so the middle of the screen updates about halfway through each refresh. That is why RTINGS lists a minimum of about 3.47ms for any 144Hz monitor: half of a 6.94ms refresh. A monitor that measures close to its refresh rate floor adds almost no processing delay of its own.
| Refresh rate | Time per refresh | Half a refresh (center of screen) |
|---|---|---|
| 60Hz | 16.7ms | 8.3ms |
| 144Hz | 6.9ms | 3.5ms |
| 165Hz | 6.1ms | 3.0ms |
| 240Hz | 4.2ms | 2.1ms |
| 360Hz | 2.8ms | 1.4ms |
These numbers are plain math (1000 divided by the refresh rate), so they hold for any monitor. Use them as a yardstick. When you compare reviews, check that both figures come from the same reviewer and test version, since different tools measure different points on the screen and some include pixel response in the result.
How refresh rate affects input lag
A higher refresh rate lowers input lag because the screen redraws more often. At 60Hz a new frame can wait up to 16.7ms for its turn. At 144Hz that wait drops to under 7ms, and at 240Hz to about 4ms. The monitor also finishes drawing each frame faster, so the whole screen is fresher. Even a budget step up helps, as our verdict on whether 100Hz is good for gaming explains.
The catch is that your graphics card has to keep up. A 240Hz monitor running a game at 70 FPS still shows new content only 70 times a second. If you are weighing a mid-range upgrade, our guide to whether a 165Hz monitor is good for gaming looks at what frame rates you need to feel the difference.
Backlight strobing modes, sold under names like MPRT, ELMB or DyAc, cut motion blur by flashing the backlight between frames. They work on blur, not lag, and on some models they can add a little delay. Our guide to MPRT on a monitor covers when strobing is worth it.
Game mode and the processing that adds lag
Image processing is the main reason one screen has more lag than another. Every feature that changes the picture after the signal arrives needs time to work. Most PC monitors do very little of this, which is why their lag is low. TVs do much more.
Features that can add lag include:
- Scaling. Running below native resolution makes the monitor’s scaler stretch the image, which can add a small delay and softens the picture. Run games at native resolution where you can, or let the GPU do the scaling.
- Motion smoothing. TV frame interpolation invents in-between frames, and it has to hold real frames back to do it.
- Noise reduction, sharpening and dynamic contrast. Each one analyzes the frame before showing it.
Game mode on a TV, or PC mode on some models, switches most of this off. On a TV it often makes a large difference, and it is the first setting to change if you game on one. Our guide to the disadvantages of using a TV as a computer monitor covers lag and the other trade-offs. On a gaming monitor, a “game mode” preset is often just a color profile, so the lag change can be small. Check the monitor’s menu for any dynamic contrast or eco mode and turn those off too.
V-Sync vs adaptive sync with a frame cap
V-Sync removes screen tearing by making the GPU wait for the monitor’s next refresh before showing a frame. That wait is the problem. Frames line up in a queue, and when the frame rate hits the refresh rate, the queue fills and lag climbs.

Adaptive sync (FreeSync, G-SYNC and VESA AdaptiveSync) flips that around. The monitor refreshes when the GPU finishes a frame, so there is no tearing and no queue while you stay inside the monitor’s variable refresh rate (VRR) range. Our guide to the adaptive sync monitor explains how it works and how to turn it on.
The one gap is the top of the range. If your frame rate reaches the maximum refresh rate, adaptive sync can no longer follow it, and V-Sync or tearing takes over. The fix is a frame cap a few FPS below max refresh. NVIDIA’s Max Frame Rate guide recommends setting the cap slightly below your display’s maximum refresh rate to stay inside the VRR range.

On an NVIDIA card, turn on G-SYNC in the NVIDIA app under System > Displays, then set Vertical sync and Max Frame Rate under Graphics > Global Settings. If the old NVIDIA Control Panel is still installed, the same options sit under Manage 3D Settings. If you run an NVIDIA card on a FreeSync screen, our guide to using a FreeSync monitor with an NVIDIA GPU walks through it. On AMD, FreeSync is turned on in AMD Software: Adrenalin Edition, and an in-game cap or Radeon Chill can limit the frame rate.
NVIDIA Reflex and AMD Anti-Lag
Reflex and Anti-Lag cut the delay inside your PC, not inside the monitor. Both stop the CPU from running too far ahead of the GPU, so frames do not sit in a queue waiting to be drawn. That matters most when your GPU is maxed out, which is when the queue grows.
NVIDIA Reflex is built into supported games, where you turn it on in the game’s settings. NVIDIA describes it as reducing PC latency by syncing rendering between the GPU and CPU. Its Reflex page also lists Reflex 2 with Frame Warp, which updates the frame with your latest mouse input just before it goes to the display. For games without Reflex, the driver’s Low Latency Mode does a simpler version of the same job.
AMD Radeon Anti-Lag works at the driver level. AMD’s Anti-Lag setup guide says it is off by default and is turned on from the Global Graphics settings in AMD Software: Adrenalin Edition, or per game in an app profile. Alt+L toggles it during play. AMD notes that Radeon Chill cannot run at the same time, so turning on Chill disables Anti-Lag. Anti-Lag 2 is the newer version, built into supported games, and AMD lists RDNA 1 (Radeon RX 5000 series) or newer as the requirement.
If a game offers Reflex or Anti-Lag 2, turn it on. It costs nothing in image quality and often removes more lag than any monitor setting can.
Wireless vs wired peripherals
A modern wireless gaming mouse on its own 2.4GHz receiver is fast enough for competitive play. Bluetooth is slower and less steady, so keep it for office work. Polling rate also matters: a mouse at 1000Hz reports every 1ms, while one at 125Hz reports only every 8ms. Keep the receiver close to the mouse, for example in a front USB port, so the signal stays clean. A wired mouse removes the question entirely.
How to test your input lag
Measuring the monitor alone takes special gear, but you can measure the whole chain at home. The most direct way is NVIDIA’s Reflex Latency Analyzer. It is built into certain G-SYNC monitors and works with a Reflex-compatible mouse. The monitor detects the click, then measures how long the resulting pixels, such as a muzzle flash in a shooter, take to change on screen.
Without that hardware, you can still compare settings:
Turn on a latency overlay
Many Reflex games show PC latency in their own stats. On AMD, the driver’s latency monitor (Alt+Shift+L) shows latency in frames when Anti-Lag 2 is active.Pick a repeatable scene
Stand in the same spot in a practice range or menu so the GPU load stays the same between runs.Change one setting at a time
Toggle V-Sync, the frame cap, Reflex or Anti-Lag, and the monitor’s game mode one by one, and note the latency after each.Keep what helps
Leave on the settings that lower the number without causing tearing or stutter.
A slow-motion phone video of your mouse click and the screen can also give a rough comparison between two screens, but phone frame rates limit how precise it is.
Conclusion
Input lag on monitors is the delay from your input to the image changing, and the monitor is only one link in the chain. To keep it low, run native resolution with game mode and extra processing off, use the highest refresh rate your GPU can feed, choose adaptive sync with a frame cap a few FPS below max refresh over V-Sync, and turn on Reflex or Anti-Lag in games that offer them. A good result is a monitor that measures close to its refresh rate floor and a PC that never queues frames. For more on display specs, see our specs guides or browse the full SubInsider monitor knowledge base.
Frequently asked questions
What is a good input lag for a gaming monitor?
Lower is better, and the floor depends on refresh rate. At 144Hz, RTINGS puts the lowest possible reading at about 3.5ms, because the screen takes that long to draw down to its center. A monitor that measures close to its refresh rate floor adds almost nothing. Higher numbers usually point to extra processing inside the monitor.
Is input lag the same as response time?
No. Input lag is how long it takes for a new frame to start showing after the signal arrives. Response time is how long a pixel then takes to change shade. A monitor can have low input lag and slow pixels, which looks like smearing, or fast pixels and high lag, which feels sluggish. Both matter, but in different ways.
Does a higher refresh rate reduce input lag?
Yes. Each refresh is shorter, so a new frame reaches the screen sooner. A frame lasts about 16.7ms at 60Hz, 6.9ms at 144Hz and 4.2ms at 240Hz. You only get the full benefit if your graphics card can render frames close to that rate, so a high refresh rate pairs best with a strong GPU.
Does HDMI or DisplayPort have less input lag?
Neither, in any way you would notice. Both carry the image as a digital signal at the same speed. What matters is whether the cable and port support your monitor's full refresh rate and adaptive sync. If one port only reaches 60Hz on your monitor, the other port will feel faster because of the higher refresh rate, not the cable.
Does a wireless mouse add input lag?
A modern gaming mouse on its own 2.4GHz receiver adds very little and is fine for competitive play. Bluetooth is usually slower and less consistent, so keep it for office use. Polling rate matters too: at 1000Hz the mouse reports every 1ms, while at 125Hz it reports every 8ms.