Is 100Hz Good for Gaming? Who It Suits

Buying
Table of contents

Yes, 100Hz is good for gaming if you play casually, play a mix of genres or are on a budget. A 100Hz monitor draws a new image every 10 milliseconds instead of every 16.7 on a 60Hz screen, so camera pans look smoother, fast objects stay easier to follow and your mouse feels more connected. It is not the best pick for serious competitive shooter players, who get more from 144Hz and up, and it does nothing extra for a PS5 or Xbox.

Who 100Hz suits, and who should skip it

The honest answer depends on what you play and what your PC can feed the screen. Here is the verdict by player type.

Is 100Hz enough? A verdict by player type
PlayerIs 100Hz enough?Why
Casual and story-game playersYesSmooth motion without paying for speed you will not use
Budget PC gamersYes, often the best fitAn entry-level GPU can actually reach 100fps at 1080p
Office work plus some gamingYesSmoother scrolling and cursor at little or no extra cost
Ultrawide ownersUsually yes3440x1440 is hard to drive much past 100fps anyway
Competitive shooter playersNo, aim higher144Hz to 240Hz gives quicker, clearer frames to react to
Console-only playersNo real benefitPS5 and Xbox run it at 60Hz; look for 120Hz over HDMI 2.1

The common thread is frame rate. A 100Hz monitor only pays off when your games run near 100fps. If your PC sits at 50fps in the games you play, the monitor is not the bottleneck, and a faster screen will not fix that.

What 100Hz changes: the frame-time math

Frame time is how long each image stays on screen before the next one replaces it. You get it by dividing 1,000 by the refresh rate. It is the clearest way to see why some upgrades feel huge and others feel minor.

Frame time at common refresh rates, measured from 100Hz
Refresh rateTime per frameCompared with 100Hz
60Hz16.7 ms6.7 ms slower
75Hz13.3 ms3.3 ms slower
100Hz10.0 msBaseline
120Hz8.3 ms1.7 ms faster
144Hz6.9 ms3.1 ms faster

Read the right-hand column and the pattern is plain. Moving from 60Hz to 100Hz saves 6.7 ms on every frame. Moving from 100Hz to 144Hz saves another 3.1 ms, less than half as much, and it asks your graphics card for 44 more frames every second. Each step up the ladder buys less time than the one before.

100Hz vs 60Hz

This is the upgrade you notice in the first minute. Dragging a window, scrolling a web page or turning the camera in a game all look less jumpy, because each movement is split into 100 steps per second instead of 60. Input feels a little snappier too, since the screen shows the result of your click sooner.

Is 75Hz good for gaming?

75Hz is better than 60Hz, but only just. Frame time drops from 16.7 ms to 13.3 ms, which is half of what 100Hz gives you. It is fine for slow games and a fair choice if you already own a 75Hz monitor. If you are shopping now, entry-level 1080p models with 100Hz are easy to find, so there is little reason to choose the slower one.

100Hz vs 144Hz

The gap is real but modest. At 144Hz each frame lasts 6.9 ms against 10 ms, and fast shooter players tend to feel it as cleaner tracking and flicks. In slower games most people are content at 100Hz. The bigger cost of 144Hz is often hidden: you need a PC that can reach 144fps for the extra speed to show. If you are weighing even faster screens, our guide on whether 165Hz is good for gaming covers the next tier up.

Why budget monitors now ship at 100Hz

For years, cheap office monitors ran at 60Hz and the first gaming step was 144Hz. That gap has filled in. Makers now list 100Hz on many entry-level 1080p screens. LG, for example, lists its 27MR400-B as a 27-inch Full HD IPS monitor with a 100Hz refresh rate and AMD FreeSync, a model sold as an everyday monitor rather than a gaming one. Dell and Acer offer similar 100Hz models in their budget and office ranges.

There is a simple technical reason this works. A 1080p signal at 100Hz needs far less bandwidth than an HDMI 2.0 port carries, so makers can raise the refresh rate without new ports or expensive parts. For buyers, the upshot is that a monitor marketed for spreadsheets may now be a fair entry-level gaming screen.

Two things are still worth checking on these cheaper models. The first is response time: at 100Hz a frame lasts 10 ms, so pixels need to change shade well inside that window to avoid smearing.

Diagram showing a pixel changing from one grey shade to another over its response time
Response time is how fast a pixel moves from one shade to another. At 100Hz, each frame gives it 10 ms.

Our guide on whether 5ms response time is good explains how to read that spec, and the MPRT explainer covers the motion blur that comes from holding each frame. The second check is the port list. Some budget monitors only reach their top refresh rate over HDMI, while a VGA port, if there is one, is often limited to a lower rate.

100Hz ultrawide monitors

100Hz is especially common on 34-inch ultrawides. Dell, for one, lists its curved S3422DW at 3440x1440 with a 48 to 100Hz refresh range and AMD FreeSync.

There is a good fit here. A 3440x1440 screen has about 4.95 million pixels, roughly 34% more than a standard 2560x1440 monitor. Pushing well past 100fps at that resolution takes a strong graphics card, so many players would not fill a faster ultrawide in demanding games anyway. For slower, cinematic titles, racing games and flight sims, 100Hz on a wide screen is a comfortable match.

Watch the per-port limits on ultrawides. Dell lists its S3422DWG gaming version at 144Hz over DisplayPort but 100Hz over HDMI, so the cable you use decides the rate you get. And since not every game supports 21:9, our guide on playing 16:9 games on an ultrawide covers how to keep the picture undistorted.

Consoles: why a 100Hz monitor runs PS5 and Xbox at 60Hz

Consoles do not output 100Hz. According to PlayStation’s display guide, the PS5 offers 60Hz and 120Hz output, plus 50Hz for some regional content. Xbox Series X|S consoles also work in 60Hz and 120Hz modes. A monitor whose top rate is 100Hz cannot accept the 120Hz signal, so the console falls back to 60Hz.

That is not a problem in itself. The picture looks exactly like it would on a 60Hz screen. You just get none of the extra smoothness you paid for. If you mostly play on a console, look for a monitor that accepts 120Hz over an HDMI 2.1 port instead. If you split time between a PC and a console, a 100Hz monitor is still fine, with the PC getting the benefit.

Adaptive sync at 100Hz

Adaptive sync makes the monitor wait for each new frame instead of refreshing on a fixed clock. That stops screen tearing (a visible split where two frames meet) and stutter when your frame rate moves around. It matters a lot at 100Hz, because many PCs hover between 70 and 100fps rather than holding a perfect 100.

Diagram comparing a torn frame without sync to a clean frame with adaptive sync
Without sync, the screen can show parts of two frames at once. Adaptive sync keeps each frame whole.

Every adaptive sync monitor has a working range. A 100Hz monitor with a 48 to 100Hz range, like the Dell ultrawide above, stays smooth anywhere between 48 and 100fps. Below the bottom of that range, the effect can drop out unless the monitor and GPU double frames to stay inside it.

Diagram of a variable refresh range bar with a minimum and maximum refresh rate
Adaptive sync works inside a range. This example runs 48 to 144Hz; a typical 100Hz monitor tops out at 100.

A practical tip: cap your frame rate a few frames under the top of the range, around 97fps on a 100Hz screen. That keeps games inside the sync window instead of bumping the ceiling. Most games have a frame limiter, and so do AMD Software and the NVIDIA app (Graphics, then Global Settings).

Without adaptive sync, a game locked at 60fps on a 100Hz desktop can judder, because 100 is not a whole multiple of 60. Some frames stay on screen longer than others, and motion looks uneven.

Diagram showing an odd refresh and frame rate pairing stuttering next to a clean multiple
When frame rate and refresh rate do not divide evenly, frames are held for uneven lengths of time and motion stutters.

Most 100Hz monitors list AMD FreeSync, and NVIDIA cards can use those screens too as G-SYNC Compatible displays. Our guide to using a FreeSync monitor with an NVIDIA GPU covers the cable and driver details, and the full adaptive sync explainer goes deeper on ranges and frame doubling.

How to make sure your monitor is running at 100Hz

A new monitor often starts at 60Hz, so it is worth checking. Work through these in order.

  1. Use a port and cable rated for 100Hz

    Connect over HDMI or DisplayPort, not VGA, and plug into the graphics card on a desktop with a dedicated GPU. Check the manual if the monitor lists different top rates per port.
  2. Set the rate in Windows

    Open Settings, then System, then Display, then Advanced display. Pick the monitor if you have more than one, and choose 100Hz next to Choose a refresh rate.
  3. Turn on adaptive sync

    Enable FreeSync or adaptive sync in the monitor’s on-screen menu first. Then turn it on in AMD Software on the Display tab, or in the NVIDIA app under System, then Displays.
  4. Check the game settings

    Run games in fullscreen or borderless mode at your native resolution, and make sure any in-game refresh or frame cap is not stuck at 60.
  5. Confirm on the monitor

    Many monitors show the live input signal and refresh rate in an information page of the on-screen menu. If it reads 100Hz, you are set.

Microsoft’s guide to changing your screen refresh rate in Windows has the same path, and notes that rates marked with an asterisk will also change your resolution. If NVIDIA’s classic Control Panel is still installed on your PC, it shows the same option, but the NVIDIA app is where current drivers put it.

Diagram of common monitor connectors: HDMI, DisplayPort, USB-C, VGA and DVI
HDMI and DisplayPort carry 100Hz on most monitors. VGA is often limited to a lower rate.

If 100Hz does not appear in the list at all, the cable or port is the usual cause. Try a different cable, then a different input, and see our guide on how to connect a monitor for port choices.

What size works best for a 100Hz monitor

Most 100Hz monitors come in 24 and 27-inch 1080p versions, plus 34-inch ultrawides. At 24 inches, 1080p stays sharp and easy for a budget GPU to drive near 100fps. At 27 inches, 1080p starts to look soft up close, so sit a little further back or consider 1440p if your card can handle it. Our guide to a good size monitor for gaming matches screen size to desk distance.

Conclusion

Is 100Hz good for gaming? Yes, for casual players, budget PC builds, mixed office and gaming use, and most ultrawide owners. It cuts frame time from 16.7 ms to 10 ms, which is the upgrade most people feel the most, and an entry-level graphics card can actually fill it. Competitive shooter players should aim for 144Hz or higher, and console players should look for 120Hz over HDMI 2.1. Turn on adaptive sync and confirm the 100Hz setting. For more help choosing, see our monitor buying guides or browse the full SubInsider monitor knowledge base. To confirm the screen is really running at 100Hz, see how to check monitor refresh rate.

Frequently asked questions

Is 75Hz good for gaming?

It is a small step up from 60Hz, not a big one. At 75Hz a frame lasts 13.3 milliseconds instead of 16.7, so motion is a little smoother. It is fine for slow and casual games on a tight budget. If you are buying new, a 100Hz monitor usually costs about the same and gives you a much more noticeable gain.

Is 100Hz vs 144Hz a noticeable difference?

Yes, but it is smaller than the jump from 60Hz to 100Hz. A frame lasts 10 milliseconds at 100Hz and 6.9 at 144Hz, a gap of about 3 milliseconds. Fast shooter players tend to feel it when tracking targets. In slower games, most people are happy at 100Hz, especially with adaptive sync turned on.

Can a PS5 or Xbox run at 100Hz?

No. PS5 and Xbox Series X|S output at 60Hz or 120Hz, with no 100Hz mode. A monitor that tops out at 100Hz cannot take the 120Hz signal, so the console runs it at 60Hz. That still looks normal, but you get none of the extra smoothness. For console 120Hz gaming, buy a monitor with an HDMI 2.1 port rated for 120Hz.

Do I need a powerful graphics card for a 100Hz monitor?

No. That is one of the main reasons to choose 100Hz. Reaching 100 frames per second at 1080p is far easier than reaching 144 or 165, so entry-level and older cards fill the screen more often. Lower a few settings if you fall short, and let adaptive sync smooth out the gaps.

Is 100fps good for gaming?

Yes. At 100fps a new frame arrives every 10 milliseconds, which feels smooth and responsive in almost any game. To actually see all 100 frames, you need a monitor running at 100Hz or higher. On a 60Hz screen, the extra frames still lower input lag slightly, but the display can only show 60 of them each second.